Meyer Sound Ultra X-20 - Compact Wide Coverage Loudspeakers
Meyer Sound Ultra X-20 delivers Point Source Solutions for Size-Critical Applications Meyer Sound’s ULTRA-X20 self-powered full-range loudspeaker brings state-of-the-art ULTRA-X40 point source technology to a smaller, lighter footprint, ideal for installed and portable applications where size and weight are critical factors. Whether used as a compact main system or as fills or surrounds in a larger system, count on the ULTRA-X20 to deliver high power output, low distortion, and consistent polar response in any configuration.
The ULTRA-X20 measures just 7.5 inches wide by 19.04 inches high by 8.6 inches deep, but packs a mighty punch, delivering 123.5 dB peak SPL measured using M-Noise. It features two 5-inch cone drivers and a 2-inch compression driver in concentric configuration for more consistent pattern control below the crossover point.
The ULTRA-X20 rotatable horn produces precise, even coverage regardless of orientation. It's available in three Constant-Q horn variants, for optimal coverage in any scenario. The ULTRA-X20 features a 110° x 50° horn, while the ULTRA-X22 provides more controlled 80° x 50° coverage and the ULTRA-X23’s horn provides a wider 110° x 110° coverage
Ultra-Efficient Amplification
ULTRA-X20 is
powered by a three-channel, 860-watt peak Class D digital amplifier
with a sophisticated DSP package including electronic crossover,
correction filters for phase and frequency response, and
driver-protection circuitry. Phase-corrected electronics ensure flat
acoustical amplitude and phase response for exceptional impulse response
and precise imaging.
Intel at Your Fingertips
Don’t leave system
management to chance: ULTRA-X20 loudspeakers are compatible with Meyer
Sound’s RMS platform, which lets you monitor essential performance
parameters right from your Mac or Windows PC running Compass control software.
Smart Power Solutions
Power up with peace of
mind: ULTRA-X20’s built-in IntelligentAC technology auto-selects correct
operating voltage, suppresses high voltage transients, filters EMI, and
provides soft-start power-up. The ULTRA-X20XP loudspeaker variant
incorporates IntelligentDC technology, which receives balanced audio and
DC power from a single composite cable—eliminating the need for conduit
and allowing for longer, lighter-gauge cable runs.
Making All the Right Connections
The ULTRA-X20
may be configured with any of three connector panel options. Two
AC-powered versions feature looping Powercon connectors with either
3-pin or 5-pin XLR audio I/O and RMS remote monitoring; an IntelligentDC
variant receives audio and DC power over single cable via its 5-pin
Phoenix connector.
Meyer Sound ULTRA-X20 Features
- Exceptional fidelity and surprising power capability delivered in a compact, elegant and light aluminum enclosure
- Extraordinarily flat amplitude and phase response ensures tonal accuracy and precise imaging
- Wide pattern covers broad listening areas
- Rotatable horn provides installation flexibility
- Integral stand mount and QuickFly® mounting options facilitate rigging
- An innovative, highly efficient class D amplifier reproduces any sound source with linearity over a wide dynamic range
- The small-size cabinet weighs only 27 lb. (12.3 kg)
- Its
concentric driver configuration has all the benefits of a coaxial
driver, yet none of the disadvantages. In addition, this configuration
supports directional control of frequencies down to 600Hz.
- The
extremely well-behaved rotatable horn was designed for very precise,
even coverage. This horn design, in conjunction with the concentric
driver configuration, delivers the same pattern regardless of
orientation