HOME > PRO AUDIO > ACOUSTICS > Acoustic Sciences >

ASC WallDamp Squares 4″ x 4″ x 1/20″
ASC WallDamp Squares 4 x 4 x 1/20


 
Alternative Views:


ADVERTISED PRICE: $34.00

Availability: Usually Ships in 1 to 2 Weeks
Qty:

Description
 

ASC WallDamp Squares 4″ x 4″ x 1/20″ - 25 squares per bundle


ASC-WallDamp takes all the mystery out of soundproofing walls. It is a double sided, self adhesive sheet of material and its two step application is simple and quick. Just remove the release paper and place WallDamp between every joint, every connection in your wall. The pressure sensitive adhesive of WallDamp glues the wall together and that improves its overall structural integrity but more important is the polymer compound of the WallDamp sheet itself.

WallDamp's benefits include superior structural damping, easy installation, compatibility with most existing wall systems and cost effectiveness.

WallDamp technical explanation:


ASC-WallDamp is a construction material that is an add-on or upgrade to standard wall and ceiling construction projects. By locating WallDamp material between the joints in a frame construction project, the rooms in the building take on that solid feeling of lath-and-plaster. With WallDamp in place, any vibration or sonic energy that finds itself inside the walls of the building is quickly removed, before it can be heard. This means that lightweight, cost effective stick frame and gypsum board walls can now provide the performance of much more expensive and heavy construction methods. Another important feature is that the WallDamp construction method uses standard construction materials and practices with the simple addition of a thin sheet of damping material that is slipped into every joint possible.

WallDamp construction is more resistant to the intrusion of external noise such as truck and train rumble, aircraft flyovers, sonic booms and neighborhood heat pumps. It works just as well in reverse. The loud sound from the stereo, home theater system or music practice room stays inside the house and out of the neighbor's yard. Then, there is the sound within the house. The wind can blow the front door closed without jarring through the entire house. The sound power from the stereo or home theater, including the subwoofer thump, stays in the room and doesn't shudder the whole house. Kids can play downstairs and the adults upstairs hear almost nothing. Probably, the best thing that WallDamp contributes to today's living experience is the increased sense of peace and quiet at a time when, day-by-day, more noise seems to be the only option.

WallDamp construction method:


When sound or vibration tries to pass through the walls, floor or ceiling of a room, is causes those surfaces and the structure behind each of them to move. When a wall, floor or ceiling vibrates, it changes shape. If WallDamp is located at the joints, between each of the parts that make up the wall, floor or ceiling, then any movement at all by the wall, floor or ceiling causes a distortion of the WallDamp. This distortion then absorbs energy and any vibration is quieted right down.

To improve the ability of WallDamp to extract energy out of the micro movement of a structure, the viscoelastic sheet is coated with a strong adhesive on both sides. This means that even the slightest movement at the joint between members of a structure produces distortion of the WallDamp material. The most common application for WallDamp today is to glue it to each face of the wall studs and then nail or screw the gypsum board down as usual. It is also used between the first and second layers of double layer gypsum board.

What is fantastic about WallDamp construction is that it not only keeps sound and vibration from passing through the surfaces of the room but that it actually absorbs it. By comparison, a concrete room is well known for keeping sound from getting out, but it's bad for the person left in the room, the listener. If sound can't get out of a room it has to stay in the room and reverberate. Carpet, draperies and furnishings may provide some acoustic friction inside the room to attenuate sounds in the treble range but they supply little to no absorption for sounds in the bass range. That is why concrete rooms are very boomy sounding. Only WallDamp provides for both a soundproof and an energy-absorbing wall.

The best WallDamp construction system is the Iso-WallDamp system developed at Acoustic Sciences Corporation. In the Iso-Wall system, a damped double layer gypsum board wall is built on one side of the stud and a suspended damped double layer gypsum board wall is placed on the other side of the studs. The suspended wall rides on standard resilient channels, flexible metal strips, which are attached to the sides of the studs or for the ceiling, to the bottom sides of the joists. The pressure fluctuations from low frequency sound can still move the walls ever so slightly but now, when the walls move, they no longer directly push the studs or joists. Since movement of the wall doesn't push the studs, it cannot transfer sonic pressure pulses into the structure of the house.

Standard isolation wall construction methods have been providing some measure of sound isolation for nearly 50 years. However, powerful low frequency sound generators, the subwoofers found in today's Hi-fi and home theater systems have only been popular for about 5 years. With standard isolation construction methods, once the walls begin shaking with the sound, they continue shaking even after the sound stops. This isn't much different than the concrete room except that this time the reverberant vibration is not in the air but in the shuddering walls. Here is where WallDamp goes to work, absorbing the energy out of the shuddering vibrating walls. With WallDamp we have the best of all, lightweight and cost effective walls that sound better than concrete walls.

How does WallDamp actually work?


A wall, floor or ceiling is constructed using a complex set of objects, each touching the other in some fashion. When any one piece moves, it pushes on the adjoining pieces and so on. The reason WallDamp works is that it is located between all the pieces so that every time one piece pushes against another, WallDamp is there absorbing energy out of the push. Actually WallDamp does not absorb much energy when one piece pushes or pulls squarely on another piece. It does absorb a lot of energy when one piece tries to slide past the other. Fortunately when an object pushes on another object, there is a strong tendency for the two to slip or slide a bit at their contact point. This is where WallDamp extracts the energy - from the shifting surfaces. (See Footnote below for an explanation of how WallDamp extracts energy.)

The second thing about WallDamp is that it has been made to extract energy from microscopic movements. That's good because very small movements are involved in the making of sound, especially when it comes to surfaces as big as walls, floors and ceilings. There are many kinds of viscoelastic materials. The most familiar is the soft type that is put into the heels of runner's shoes to absorb the shock of the footfall. The deformation of this soft material is measured in fractions of an inch. WallDamp is relatively hard but that is because the deformation it has to process is measured in thousandths of an inch or less. The hardness corresponds to the force and the deformation involved. WallDamp is made for structural damping.

Another thing to know about viscoelastic materials is, if they get too hot, they get soft and lose their energy absorbing power. Similarly, if they get too cold, they harden up and lose their energy absorbing power. Each viscoelastic material is blended to operate in a certain temperature range. WallDamp is made for the temperatures found in the walls, floors and ceilings of homes, apartments, duplexes and offices, places where people live and work.

WallDamp may look simple but what it does is complex and well suited to its application in damping out the free vibration of walls, floor and ceilings. WallDamp is setting the new standard in frame construction. And, once you hear the difference, you'll know what you've been missing.

How does WallDamp extract energy from the walls?


Viscoelastic materials absorb energy when one molecule of the material is forced to move past another molecule. The molecules involved are not smooth but rough shaped and when one moves past another, they sort of plug into each other. As they continue to move past, they are forced to unplug but this leaves both molecules twanging in the aftermath of being unplugged. These twanging molecules become "heat" which conducts away, warming up other molecules of WallDamp and eventually the parts that were connected to the WallDamp. Molecular friction absorbs the energy of distortion. This is the visco part of the material. Other molecules in WallDamp are connected tightly together to form a spring that becomes stretched when the WallDamp is distorted. These molecular fiber springs then act to pull the material back into shape once the distorting force is removed. Without these shape restoring molecular springs to bear the load, the visco molecules would simple squish out of the joints like grease under pressure and the energy absorbing benefit of the material would be lost.

Share your knowledge of this product. Be the first to write a review »
YOUR PRICE:
CALL OR CHAT
Call RSPE Audio Solutions for the fastest service and support Email RSPE Audio's Solution Specialists Chat Online with RSPE Audio's Solution Specialists
Important pricing note :read more.