(Shopping cart is empty)
ATC Loudspeakers SCM45A Pro - Active Studio Monitor Speakers
LIST PRICE: $12,995.00
Usually Ships in 2 to 3 Business Days
ATC Loudspeakers SCM45A Pro - 3-way Mid-Size Active Studio Monitor Speakers (Pair)
The ATC SCM45A Studio Monitors are mid-size three-way speakers that can be used in near- or mid-field positions.
SCM45A Pro is a completely new design that shares many features with the highly successful SCM25A. It fills a gap in ATC’s product range for a mid-size three-way that can be used in near- or mid-field positions. It has high output and extended low frequency for its size, without compromising the overall balance for which ATC is known.
Like the SCM25A, the new SCM45A is an active three-way with what ATC describes as an unprecedented linear response across the critical mid-range, as well as across the rest of the audible range. In contrast to the SCM25A, the SCM45A has a second woofer for deeper bass response and increased SPL capability, as well as ATC’s new proprietary dual-suspension tweeter for increased resolution in the top-end. In addition, the SCM45A is physically symmetrical (not mirror imaged) and sized for placement on a meter bridge. The SCM45A can be used as a center speaker between other SCM45A monitors or ATC SCM50ASLs.
ATC Loudspeakers SCM45A Features:
Mid-size very high performance active 3-way studio monitor
Ideally suited to:
Critical near-field listening applications in all control rooms
LCR surround monitoring in medium control rooms
Surround channels in medium-to-large contol rooms
ATC hand built 6.5˝/164mm carbon-paper cone bass driver
ATC 25mm/1” Dual Suspension Super Tweeter
Discrete MOSFET class A/B bi-amp pack with 150W/60W/25W continuous power output
The ATC SCM Line
The SCM25/45/50/100/110 and 150 are a range of three way loudspeakers. All of the range, excluding the SCM25 and SCM45 are available as passive or active units, the SCM25 & SCM45 are only available as an active unit. Passive units have an SL suffix and active units an ASL suffix. Passive monitors are equipped with a “tri-wire” connection panel to enable separate amplification of the bass, mid and high frequency drivers. Active units have a built in three way Amplifier with frequency, gain and phase correction which has been individually optimized at the ATC manufacturing facility. Adjustment of input sensitivity and bass boost are available to the user via controls on the rear panel of the unit.
About ATC Loudspeakers
ATC was founded in London in 1974 by Australian emigre Bill Woodman, who still heads the company today. An enthusiastic pianist and engineer he was naturally drawn to loudspeaker design and after a period working at Goodmans, where many of the names that went on to found British loudspeaker companies began their careers, he struck out on his own.The premise on which ATC began is a simple one, and one that in many respects is still true today: hi-fi loudspeakers tend to be detailed and accurate but of limited dynamic range, while professional monitor speakers tend to express the opposite character. ATC products were designed from the outset to offer the best of both. It’s an easy concept to describe, but surprisingly difficult to engineer
Through ATC’s commitment to multi-channel mastering and its direct involvement with leading players in the professional audio industry including Sony Music and Telarc, ATC’s products are installed at some of the world’s most prestigious multi-channel studios and auditoria. Where ever the best is required you will find ATC.
HF 1″/25mm Dual-Suspension ‘S-Spec’, Mid 3″/75mm Soft Dome, LF 6.5″/164mm short-coil carbon paper cone
Amplitude Linearity (±2dB):
Cut-off Frequencies (-6dB, free-standing):
±80° Coherent Horizontal, ±10° Coherent Vertical
Max. Continuous SPL (1 metre):
Rear panel mounted female xlr (pin 2 +)
1V rms (ref. full output)
Input Sensitivity Trim:
0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
Balanced > 10kΩ
Amplifier Output Power:
Bass 150W rms, Mid 60W rms, High 25W rms
380Hz & 3.5Khz
4th order critically damped with phase compensations
Low Frequency Boost:
0dB to +3dB at 40Hz (continuously variable via rear panel trimmer)
Active FET momentary gain reduction
353 x 600 x 375mm (13.9˝ x 23.6˝ x 14.8˝). Handles add an additional 39mm/1.5″ to depth.
36kg / 79.2lbs (per cabinet)
Share your knowledge of this product.
Be the first to write a review »
Sign Up For Our Newsletter:
Privacy & Security
Boats & RV's
Track My Order
4130 Cahuenga Blvd., Suite 210 Universal City CA 91602 | (818) 509 5876
CALL OR CHAT
Important pricing note :