LINE INPUT
0 DBFS Reference Input Levels
elements 18 or 24dBu (switchable)
Frequency Response Inputs
20Hz – 20kHz ± 0.1dB
THD N Inputs
<-130dB (0.00003)
EIN
-96dBu A-Weighted (typical)
Signal-To-Noise Ratio
120dB A-Weighted (typical)
Converter Dynamic Range
120dB A-Weighted (typical), 10Hz – 20kHz
LINE OUTPUTS
0 DBFS Reference Levels
18 or 24dBu (switchable)
Frequency Response
20Hz – 20kHz ± 0.1dB
THD N
<-100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input
Noise In Presence Of Signal
-94dBu A-Weighted (typical)
Dynamic Range
118 dB A-Weighted (typical)
CROSSTALK
Input To Output Or Input
<-100dB unweighted, 20Hz – 20kHz; 23dBu input
Output To Input Or Output
<-100dB unweighted, 20Hz – 20kHz; -1dBFS input
DIGITAL INPUT SAMPLE RATE CONVERTERS
Sample Rate Range
32kHz to 216kHz
Gain Error
-0.3dB
Dynamic Range Inputs
>138dB
Latency
11 to 45 samples (network and sample rate dependent)
DIGITAL PERFORMANCE
Supported Sample Rates
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
Clock Sources
Internal or from Dante Network Master
External Word Clock Range
Nominal sample rate ±7.5
REAR PANEL CONNECTIVITY
Line Inputs
1 x DB-25 connectors Analogue Outputs
Line Outputs
1 x DB-25 connectors
Channel Count
2 x 2 AES/EBU channels
Input (Optional DARS)
1 x Female XLR
Output
1 x Male XLR
Word Clock Input
1 x BNC 75O port (switchable termination)
Word Clock Output
1 x BNC 75O port
PSU
2 x Internal, 100-240V, 50/60Hz, consumption 24W
Network
2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
NETWORK MODES
Redundant
Allows unit to connect to two independent networks
Switched
Connects both ports to integrated network switch allowing daisy-chaining of devices