HOME > PRO AUDIO > OUTBOARD STUDIO GEAR > Channel Strip > Neve >

Neve 1084 Mic Preamplifier & EQ Module
Neve 1084 Mic Preamplifier & Equalizer


 
Alternative Views:


PRICE: $3,995.00


Availability: This Item Usually Ships in 1 to 2 weeks
Qty:

Description
 

Neve 1084 Mic Preamplifier & EQ Module

Occupying a special place in the imagination of engineers and producers, the 1084 delivers an incredibly fat, smooth sound. While the 1084 builds on the same basic design of the world-famous 1073, it offers a significantly different palette of frequency selections. The 1084 also features a "Q" switch, allowing the user to choose between two different Q types, either narrow or wide with respect to the parametric band. These added features and the 1084’s extended versatility make it a preference over the 1073.

The 1084’s three EQ bands provide selectable frequency, with cut and boost capability, and a mid-frequency band which benefits from a High Q Presence switch. The high pass filter can be switched between 45Hz, 70Hz, 160Hz & 360Hz, and the low pass filter between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz. Both boast 18dB per octave slopes.

Handcrafted and completely hand wired in Burnley, UK by Neve’s dedicated professionals, the 1084 reissue has been reproduced to the exact specifications of the original modules.

Where innovation has improved on previous technology, Neve has welcomed such improvements. However, not all things lend themselves to enhancement. Example: audio transformers. While other manufacturers use replacements, AMS Neve alone has access to the original hand-wound transformers. This is an important factor when you consider that an analog preamp is only as good as its transformer. That is why only a Neve sounds like a Neve.

All Neve mic preamplifiers are designed to accept signals from a wide range of microphone and line sources.

Uncompromisingly low noise and distortion with generous overload performance are noteworthy hallmarks of all Neve products.
Classic Neve transformer mic preamplifier with wide range of equalizer settings 3 switchable EQ bands Hand crafted and tested precisely to original 1970 design HP and LP filters with High Q setting Transformer-balanced and earth free inputs and outputs Output: Maximum output >+26dBu into 600 ohms. Output impedance is 75 ohms @1kHz. Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output Freq. Response: +/-0.5dB 20Hz to 20kHz, -3dB at 40kHz. EQ Out. Noise: Not more than -83dBu at all Line gain settings EQ In/Out

Share your knowledge of this product. Be the first to write a review »