HOME > LIVE SOUND > SPEAKER SYSTEMS > Mackie >

Mackie HR624 MK2 - 6" 2-Way High Resolution Active Studio Monitor
Mackie HR624 MK2 - 6" 2-Way High Resolution Active Studio Monitor


 
Alternative Views:


LIST: $669.99
PRICE: $499.99


Availability: This Item Usually Ships in 3 to 5 Business Days
Qty:

Description
 

Mackie HR624 MK2 - 6" 2-Way High Resolution Active Studio Monitor

The HR624 MK2s have been redesigned with modern components for improved accuracy and an extended low-frequency response.

The HR624 MK2 Studio Monitors are high-resolution, two-way, bi-amplified, active monitors employing a 6th-order Butterworth system with a built-in rear-firing mass-loaded passive radiator.

There are many benefits to integrating an active crossover, power amplifiers, and drivers into single cabinet, and Mackie has taken full advantage of these benefits in the design of the HR624 MK2. The crossover point is designed so that the high- and low-frequency drivers are fed only the frequencies they are best able to reproduce.

The amplifiers are designed to provide maximum acoustic output from the speakers, yet minimize the danger of speaker damage due to over driving. In addition, the amplifiers’ gain and frequency responses are individually hand-trimmed to compensate for typical manufacturing tolerances between the drivers and produce a smooth frequency response from 45 Hz to 20 kHz.

The connecting wires between the amplifier outputs and the drivers are kept to an absolute minimum, so the damping factor of the amplifier isn’t compromised by the resistance of long speaker cables.

The acoustic sum of the outputs from the two drivers are optimized electronically, as well as physically, so the amplitude response is unity and the phase difference is minimal.

Mackie 1604VLZ4 Key Features

  • High resolution Active studio reference monitor
  • Ultra-linear frequency response for accurate mix translation
  • 6.7-inch high-precision, low-distortion LF transducer
  • 1-inch titanium dome, ferrofluid cooled tweeter
  • Optimized Waveguide for wide, even sweet zone

The Transducers

The monitors feature a 6.7-inch high-precision, low-distortion woofer and a 1-inch ferrofluid cooled titanium dome tweeter on the front, and a 6-inch x 9-inch elliptical flat piston passive radiator in the back. The high-frequency driver is mounted on a massive,
acoustically non-resonant die-cast aluminum exponential waveguide, which results in wide, controlled dispersion of high-frequency sounds. The unique passive radiator design provides a smooth response down to 45 Hz – an astounding
accomplishment for a cabinet of this size! And since the radiator is producing most of the sound at the lowest frequencies, there is very little distortion from the woofer because its cone movement is minimal at those frequencies.


The Cabinet

The cabinet is made of MDF with a high-gloss piano-black finish. Internal bracing increases the strength and rigidity (stiffness) of the box. An open-cell adiabatic foam material fills the inside of the box to absorb internal reflections and dampen standing waves. Mounting hardware is installed on the bottom of the cabinet that fits the WB-60 OmniMount wall-mount bracket.

Power Amplifiers

The low-frequency amplifier produces up to 100 watts continuous before clipping, while the high-frequency amplifier produces up to 40 watts continuous.

The Mackie brand is used on professional music and recording equipment, such as mixing consoles, loudspeakers, studio monitors and DAW control surfaces, digital recording equipment and more. Call or chat with a RSPE representative today for more information.


Share your knowledge of this product. Be the first to write a review »