Triad-Orbit IO-H2 - IO Quick Change Coupler Head, Stainless Steel
The IO-H2 is built with the industry-standard 5/8-inch male mounting thread and a notched stainless steel hex for added weight handling capability. IO-H2 is the optimal choice for large booms and heavy equipment.The Triad-Orbit IO-H2 quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced microphone stand system components. The IO-H2 is built with the industry-standard 5/8-inch male mounting thread and a notched stainless steel hex for added weight handling capability. IO-H2 is the optimal choice for large booms, and heavy equipment. Triad-Orbit strongly recommends using only IO-H2 in conjunction with IO-W for any wall or ceiling mounted load.
The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.
Conventional mic stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional mic stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.
Triad-Orbit IO-H2 Retrofit Quick-Change Mounting Head unique features:
- IO-H2 allows you to leave the couplers on your extra mics and swap out in a flash
- IO-H2 combines with IO-R to provide Triad-Orbit’s quick-change capability for conventional mic stands, boom arms, and mic clips
- On-the-fly hardware swaps
- Industry-standard 5/8-inch female mounting thread
- Optional 3/8-inch BSW adaptor for universal compatibility
Triad-Orbit IO-H and IO-R
IO-H Quick-Change Mounting Head combined with the IO-R coupler gives your mic stands the ability to capture and release booms and mics with ease and stability. Thanks to the hardware-swapping capabilities of IO-H and
IO-R quick-change couplers, the clumsy and tedious task of threading booms and mic clips on and off is no longer necessary. With IO-H and IO-R, rapid hardware and mic changes between recording sessions and live sets are a snap. The Triad-Orbit IO-H quick-change mounting head is the link between T-O retrofit components and conventional mic stands, boom arms, and mic clips. The IO-H features the industry-standard 5/8-inch mounting thread and an optional 3/8-inch BSW adaptor for universal compatibility.
Just as you would with a mic clip, screw the IO-R to the threaded portion of your conventional mic stand or boom. Then use the supplied hex wrench to securely lock the IO-R in place. A cam applies pressure internally to tighten the threads. Your mic IO-R stand’s threads are not stripped or damaged in any way. The IO-H hex head is threaded to the device you wish to attach or remove, e.g. boom arm, mic adapter,
iOrbit Tablet and Smartphone Mount, which then fits into the IO-R coupler.
Triad-Orbit Retrofit Components
T-O Retrofit Aftermarket Components provide compatibility between conventional mic stands, boom arms, and mic clips equipped with traditional 5/8" threads and Triad-Orbit Advanced Microphone Stand System components. Equipping traditional mic stands and boom arms with IO-R Quick-Change Couplers and Micro-R Orbital Mic Adaptors provides an exponential upgrade in functionality.